1-855-RYERSON
Cart (0)
Stock
List Metal
Resources What
We Do Locations Contact
Us
Sign Up
Select for Quote
¹Also stocked BA.
¹Stocked in 2B finish only.

¹May be smooth turned.
¹Produced oversize to finish to size shown.
¹Produced as peeled and polished, peeled and ground or centerless ground.
¹Produced oversize, rough turned to finish to size.
Other sizes not shown can quickly be produced on our in house Strip and Bar Edger. Capacity: Thickness - 1/8" min., 1/2" max.; Width - 1" min., 8" max.; Length - 20' max. Longer lengths on inquiry.
¹Produced oversize to finish to sizes shown.
¹All sizes 4" and over are rough turned.
¹Tolerances are tighter than standard bar. Weights vary slightly from this table.
¹Special Stainless Shapes can substantially reduce and often eliminate such operations as machining,welding and assembling. We can furnish many special shapes-and we'll be glad to work with you in developing a tailor-made shape for your needs.
¹309 / 309S and 310 / 310S Hot Rolled, Annealed Only.
Can also be supplied with polished finish.
¹Available stocked as Electronic Panel Quality
¹A607 was superseded by A1011.
¹.02 - .15 Carbon A526/A527 were superseded by A653.
¹5005 - H32
¹.02 - .15 Carbon A591 was superseded by A879
¹.02 - .10 carbon ².02 - .08 carbon A366 & A620 were supeceded by A1008.
¹.02 - .10 Carbon A569 CQ was superseded by A1011 CS Type B.
¹Hot Rolled, Annealed and Pickled.
SAWCUT SHAPES - Hard to find non-standard sizes or grades of flats and squares can be sawcut from stainless plate to 4" thick and 20' 0" long with close tolerances, so little or no finish machining is required.
¹.02 - .15 Carbon A526/A527 were superseded by A653.
¹Produced as peeled and polished, peeled and ground, cold drawn or centerless ground to size.
¹Produced peeled and burnished to size, or rough or smooth turned oversize.
¹Minimum yield of 50,000 psi. ²Minimum yield of 80,000 psi. ³A715 was superseded by A1011
¹.02 - .10 Carbon ²A366 was superseded by A1008.
¹ .02 - .15 Carbon ²A526/A527 were superseded by A653.
¹6061 - T6, 25 Ft. lengths
¹ .02 - .10 carbon ²A1011 superseded A569 for CQ and A622 for DQSK.
¹.02 - .10 Carbon ².02 - .08 Carbon 1,2A366 CQ & A620 DQ are the former designations.
¹Furnished to chemistry and head of coil tensile test. 2nd test to be performed on roller leveled flat plates, mid-way through the coil. All tests performed in accordance with ASTM A6.
¹Available in H112 temper.
¹T451 Temper
Style Designation - First number represents nominal width, short way of diamond, measuring from center to center of bonds. Second number represents approximate gauge of sheet before expanding.
¹These sizes are hot finished.
¹ETD 150 is elevated temperature drawn.
¹Material that is rough turned is up to ¼" oversize for machining to nominal size shown. Forgings are not Cal-Al treated. ²41L40/42 available up through 4", 41L47 from over 4" through 8" inclusive and 41L50 over 8".
²Stock Lengths: 8/12 Ft.
¹Also stocked as BA.
¹Tolerances: ± .0005", 1" and under. ²May be cold drawn or finished.
¹CDA 932 Stock sizes above are nominal. Material will machine cleanly to the sizes listed. Actual sizes provide allowances for clean-up as follows: Outside diameters to 4", excl...........+031" 4 to 5", Incl........+.063" over 5"...............+.094"
¹Material that is rough turned is up to ¼" oversize for machining to nominal size shown.
Some sizes are available as T6 & T6511 extruded
Prodec plate offers significantly better machinability than regular quality stainless plate.
Improved Finishes - To help reduce finishing costs and improve product appearance, Ryerson stocks the above plates in cold rolled and hot rolled polishing quality. This material offers a finish better than that on standard hot rolled annealed and pickled
¹20 Ft. lengths
Weights listed are per square foot.
¹Induction hardened to case depth of .030 to .060" with surface hardness of 50 to 60 Rockwell C. ²50,000 PSI Min. Yield.
Available in soft, 1/4 and 1/2 hard tempers through .162" thickness as sheet product. Over .162" is considered plate and is available in 1/2 hard temper only.
¹Also available in annealed
48" wide and Half Hard are available upon request.
¹Also available as 1030 GE B4C1B. ²Also available as 1045 GE B50E180.
¹Available in soft, 1/4 & 1/2 hard tempers through .162" in thickness as a sheet product. Over .162" is considered plate and is available in 1/2 hard temper only.
¹Available from stock in pickled and oiled. Other sizes can be quickly supplied in galvanized or pickled and oiled strip.
¹Also available in round-edge flats. ²Also available from stock as pickled and oiled. Other sizes can be quickly supplied in galvanized or pickled and oiled flats. ³Also available from stock as descaled and oiled.
¹Material that is rough turned is up to ¼" oversize for machining to nominal size shown. Forgings are not Cal-Al treated.
¹Stocked as turned and polished.
¹Sizes 10" and over are produced Forged R/T. Forgings are not Cal-Al treated.
¹Drawn, ground and polished only. ²Also available drawn, ground and polished.
¹Thickness exclusive of projecting lugs.
¹ Stocked as A572/A992 Gr. 50 ² Stocked as A36
Any size Tee can be produced to your order.
¹ Material that is rough turned is up to &frac14" oversize for machining to nominal size. Forgings are not Cal-Al treated.
¹These weights may vary depending on producing mill.
¹Generally produced to O.D. and wall dimensions. ²Generally produced to O.D. & I.D.
¹Generally produced to O.D. and wall dimensions. ²Generally produced to O.D. and I.D.
¹Also stocked asto ASTM A572 Gr. 50.
¹Painted 2 sides.
¹.02 - .15 Carbon
¹Style Designation: First number represents width to short way of diamond, measuring from center to center of bonds. Second number represents approximate gauge of sheet. See weights and data section for Ryex dimensions. Flattened sheets are slightly thinn
¹Sizes over 1 1/2 inches are killed steel. ²All sizes are fully killed, fine grain.
¹Also stocked as turned and polished.
¹Lead coated 2 sides approximately 15 Lbs per 100 Sq Ft.
¹.02 - .15 Carbon Also available with Underwriters Lab, Approved Coating ²A526 was superseded by A653.
¹.02 - .15 Carbon A591 has been superseded by A879.
¹ Also available descaled and oiled. ² Certified through 4" in thickness. Impact testing has not been performed.
¹5454 - H34
¹Based on availability.
¹T6 Temper
¹AMS specs apply over 4".
Polishing - You can get the polished finish of your choice, #3, #4, Satin, etc. on any size sheet you want. Sheets can be vinyl or adhesive paper covered for surface protection.
¹12 Ft. stock lengths ²Also available as Schedule 5 Structural Pipe.
¹Extruded T3511 Temper
¹Forging sizes over 10" are not Cal-Al treated. ²Sizes through 7" conform to A193 Grade B7 and A434 Class BC; Over 7" conforms to A434 Class BC.
¹Stocked as 302 min. BHN.
¹Not a rolled section, cut from channel.
¹For sizes under 12" Schedule 40 and Standard are the same. 12" and over are Standard but not Schedule 40.
¹For sizes under 10" Schedule 80 and Extra Heavy are the same. ²Stocked as S60 EX Hvy .500" ³STD Schedule .375", also available XS .500"
¹Per Barlow's formula ²Produced to O.D. and I.D. dimensions.
All other structural and bar size angles can be quickly galvanized.
Also available in thread rolling, flanging temper and special tolerances for Swiss automatics.
¹Produced to O.D. and wall dimensions. ²Generally produced to OD & ID.
¹Produced to O.D. and wall dimensions.
¹Various sizes up thru 7" square x 3/8 are available as Kleenkote/Redkote from West Coast.
¹Also stocked as Black on East Coast. ²Available as Kleenkote/Redkote on West Coast.
¹Produced to O.D. and wall dimensions. ²Generally produced to OD & ID.
¹Stocked as 302 min. BHN ²Material that is rough turned is up to ¼" oversize for machining to nominal size shown. Forgings sizes over 10" are not Cal-Al treated.